Neutral Tile Cleaner Archives - West Surrey Tile Doctor

Slate Floor Tile and Grout Renovation Farnham Utility

Neglected Slate Tiled Utility Room Floor Cleaned and Sealed in Farnham

The Slate floor in this room at a property in Farnham was in quite a state. “Heavily soiled” is a polite description. The floor was situated in the utility room and hadn’t been cleaned properly since the house was constructed ten years ago.

The room was mainly used as a dumping ground for walking boots and was also where the dog slept. Being out of sight it was therefore out of mind but eventually they decided it was time to do something about it and reached out to Tile Doctor for help.

Slate Floor Before Cleaning Farnham Kitchen

I visited the property, surveyed the tiles and was confident the floor could be restored! From my survey I was also able to provide a quote for a deep clean and seal of the Slate tiles which was accepted and a date set for my return.

Cleaning a Slate Tiled Utility Room Floor

I cleaned the grout first with Tile Doctor Pro-Clean, this was done using the usual method of applying it directly to the grout and leaving it to soak in for ten minutes before using an abrasive wire brush to scrub the grout clean. The floor was then rinsed then the waste extracted with a wet vacuum. This was repeated until I was happy the grout was as clean as possible.

Slate Floor During Cleaning Farnham Kitchen

Next up, I sprayed a strong dilution of more Tile Doctor Pro Clean over the tiles and left it to dwell this time for twenty minutes. The surface gradually turned yellow indicating that the product was working. Then using a tough carbide brush attached to a handheld polisher I slowly cleaned the tiles. Slate has a riven surface with lots of nooks and crannies that the brush can get into. All the waste soil was removed again with a wet vacuum and I then neutralised the floor rinsing it twice with hot water.

Sealing a Slate Tiled Utility Room Floor

For the next hour or so I dried the floor with a heater and while waiting I cleaned the small brick patio by the front door which made the entrance look a lot more inviting!

Once the floor looked dry, I tested with the damp meter to make sure it was ready to seal. Satisfied the levels were good, I applied three coats of Tile Doctor Seal and Go Extra. This is a moder tough sealer that’s ideal for busy floors that leaves an attractive sheen finish.

Once dry the floor looked so much clear and appealing, much to the relief of my client who was very happy with the work we carried out- and so was the dog!

Slate Floor During Sealing Farnham Kitchen

For aftercare I recommended using Tile Doctor Neutral Cleaner which is a Neutral pH tile and grout cleaner and will help ensure the floor stays in great condition for many years to come. It always worth readying the label of a Tile Cleaning product to check its suitable for use on a sealed floor as most household products are usually acidic and can trip a sealant off a floor with repeated use.

Professional Restoration of a Slate Tiled Utility Room in West Surrey

Neglected Slate Tiled Utility Room Floor Cleaned and Sealed in Farnham Read More »

Adhesive Stained Ceramic Tiled Kitchen Floor Renovated Ripley

Renovating a Classic Ceramic Tiled Kitchen Stained with Adhesive in Ripley

1 Comment / Ceramic Tile Cleaning, Cobham Tile Cleaning, Guildford Tile Cleaning / Rupert Mcloud

This 1940’s Black and White Ceramic tiled floor at a property in the Surrey village of Ripley was covered in adhesive and the owner needed our help in cleaning them up. Originally, they had been covered in hideous blue tiles which the customer decided to remove to see what was underneath.

Adhesive Stained Ceramic Tiled Kitchen Floor Before Cleaning Ripley

They started pulling them up only to uncover a classic chessboard pattern ceramic tiled floor underneath. The blue tiles came up quite easily however the tile adhesive that was left underneath had heavily stained them and proved much too difficult to remove. Overwhelmed with the size of the task now faced and unsure how to renovate the ceramic tiles a decision was made to ask for professional help. They contacted Tile Doctor to get a quote.

I popped over to the house to have a look at the job and estimated it would only take around a day to complete the work, which would be a bit of a manual task to remove the remnants of the adhesive. They were happy to accept my quote and pleased that I was confident the floor could be restored.

Removing Adhesive from a Ceramic Tiled Kitchen Floor

Donning safety glasses and ear defenders my approach was to carefully remove the bulk of the adhesive with a power chisel. It took several hours to remove most of it and the rest I scraped off with sharp blades leaving some residue and dirt.

Adhesive Stained Ceramic Tiled Kitchen Floor During Cleaning Ripley

To deal with the remaining adhesive I covered the tiles with a strong dilution of Tile Doctor Remove and Go and left it to soak in. I then brought in a weighted buffer fitted with a coarse diamond pad and ran it over the tiles. This removed all the remaining adhesive and lifted out the dirt.

The resultant slurry was then rinsed off and extracted with a wet vacuum. The floor was then thoroughly rinsed with warm water then dried. Before finishing I cleaned up around the edges with a handheld diamond block.

Generally ceramic tiles don’t need sealing as they are sealed within the factory process. So, once all the adhesive was gone, the job was finished.

Adhesive Stained Ceramic Tiled Kitchen Floor After Cleaning Ripley

The floor was transformed by the work, and my customer was very happy with the finish. They were pleased to see the nasty blue tiles gone and very happy to see the classic original floor restored.

Little maintenance is required for a floor like this, normal regular mopping will suffice. They can use Tile Doctor Neutral Tile Cleaner for this, it has a minty fresh fragrance and is mild enough to be used daily, keeping the floor in great condition.

Adhesive Stained Ceramic Tiled Kitchen Floor After Cleaning Ripley

Professional Restoration of a Ceramic Tiled Kitchen Floor in Surrey

Renovating a Classic Ceramic Tiled Kitchen Stained with Adhesive in Ripley Read More »

Victorian Tiled Hallway Floor Cleaning Sealing Farnham

Victorian Tiled Hallway Deep Cleaned and Sealed in Farnham

1 Comment / Farnham Tile Cleaning, Victorian Tile Cleaning / Rupert Mcloud

This client from Farnham had been in touch regarding their Victorian tiled hallway which needed deep cleaning and re-sealing. As usual I paid them a visit, surveyed the floor, and provided a quote for renovating it which they were happy to accept, there were no broken tiles to remove and replace so it was a straightforward clean and seal. It was a lovely floor which had been laid in a herringbone pattern with lovely black and gold floral inserts and a beautiful green border.

Whilst discussing dates it became apparent that they were planning on having some decorating done in the same area, so I recommended they book me in for a date after the decorators had left. It’s always good practice to get the floor cleaned after your last tradesperson has left, decorators especially have a habit of not covering floors properly.

Cleaning a Victorian Tiled Hallway Floor

I turned up on the agreed date and was pleasantly surprised to see there were only a few paint splashes on the floor so I wondered if my comments to the owner must have been passed onto the decorators. The hallway led onto several rooms many of which had new carpets, so with my own advice in mind I made sure to cover them with a plastic sheet before starting work.

Victorian Tiled Hallway Floor During Cleaning Farnham

The first job was to remove any existing sealer from the tiles using Tile Doctor Remove and Go, this is brushed onto the tiles, left for ten to fifteen minutes, and then scrubbed in with a black pad fitted to a rotary floor machine running at slow speed. The resultant slurry was then rinsed off and extracted with a wet vacuum. It was a small floor so I planned to seal the floor later that day and so I only used a minimal amount of water and used the wet vacuum to remove as much moisture as possible.

Next, I gave the floor an acid rinse by carefully smearing Tile Doctor Acid Gel over the tiled surface. Leaving it to dwell for half an hour yet keeping it moist with water. I then introduced my weighted burnishing machine. Circling the floor, it slightly cuts the tile creating a slurry of tile and dirt. The pads can struggle to get right into the corners so once that was done, I scooted around the edges hand cleaning them with a scrubbing brush and ensuring any paint splashes the decorators had left were removed.

All the waste was extracted, and the floor given a rinse with hot water. I left a small heater on them while I had my lunch. As the gel doesn’t penetrate the tiles like fluid it didn’t take long for the floor to dry sufficiently enough for sealing.

Sealing a Victorian Tiled Hallway Floor

Finally, I applied three coats of Tile Doctor Seal and Go Extra. This is a hard-wearing colour enhancing sealer. Each coat takes twenty to thirty minutes to dry. After the final coat I ask that it’s not walked on for a good hour.

Victorian Tiled Hallway Floor After Cleaning Sealing Farnham

Once done to the floor looked really clean and the new sealer should keep it that way for many years to come. Before leaving I took time to discuss maintenance cleaning and of course get their feedback which they gladly gave and is copied below:

“Great service. Rupert was professional, informative, friendly clean worker who made a great job of cleaning our original Victorian tiled floor. Tile Doctor were recommended to me by a friend, and I would definitely recommend them and Rupert for tile cleaning.”

For the aftercare of Victorian tiled floors, I recommended the use of Tile Doctor Neutral Tile Cleaner which due to its neutral ph makes it idea for the regular cleaning of sealed tiles. Many of the products you will find in supermarkets are simply too strong and will prematurely erode the sealer on a tile and so best avoided.

Professional Restoration of a Victorian Tiled Hallway in West Surrey

Victorian Tiled Hallway Deep Cleaned and Sealed in Farnham Read More »

Victorian Black White Pathway Repair Restoration Surbiton

Neglected Black & White Victorian Tiled Pathway Restored in Surbiton

1 Comment / Ewell Tile Cleaning, Victorian Tile Cleaning / Rupert Mcloud

Over the past ten years I’ve restored many tiled pathways, however none were in such a poor state as this example in Surbiton. Unfortunately, it had been badly installed and then further “repairs” by the customers ex father In-law hadn’t helped. I certainly had my work cut out and working outside of course has its own challenges.

Victorian Black White Pathway Before Restoration Surbiton

Repairing a Neglected Victorian Tiled Pathway

The first task was to clear the area of plant life and other detritus, all the existing holes had to be totally cleaned out so I could see exactly what I was dealing with. I discovered the foundation of the path was not very deep and this had allowed it to be disturbed by adjacent rose bushes so these had to be chopped back and the roots removed. I also had to rope-off the area as anyone treading on the path would dislodge further tiles resulting in Amazon and the postwoman having to take a more cumbersome route.

The next step was to remove the existing concrete edging, now normally I wouldn’t do this as I’m not a building contractor however given the problems with the path foundations it made sense. Additionally new steel edging would form an excellent base and straight line from which I could re-build the path. I had to break the concrete edging out with a power chisel and left the pieces in building sacks for the customer to dispose of. The customer supplied the replacement metal edging which is joined together, worked into the ground with a sledgehammer and then secured with foot long metal stakes.

Victorian Black White Pathway During Restoration Surbiton

The next day were spent cleaning up three buckets of loose tiles in the rear garden. These had been reclaimed over the years. I knew we would be short of replacements so I also ordered matching Victorian tiles from the Vintage Tile Company in Margate. The only way to clean them up effectively is with a wet tile cutting machine whizzing down the edges. It’s a wet, messy, noisy business made harder by the incoming rain. It took all day to make 100’s of tiles acceptable. It was tedious work but made more enjoyable by the numerous cups of tea that were made available.

The next day was spent removing and cleaning up the existing broken base. Once removed I filled the holes and gaps with self-levelling compound. Thankfully the new metal straight edges allowed the compound to level out nicely. It was then left to set over night.

The next two days were spent tiling. I had three buckets and two boxes of tiles to use. It’s a slow process that sometimes you need to step away from to make sure you’d used the correct colour and pattern. The customers ex father in-law hadn’t done this so rogue tiles were removed.

Deep Cleaning a Neglected Victorian Tiled Pathway

Once I had finished repairing the tiles on the pathway, I was able to move onto what I know best, i.e., cleaning and sealing the whole area. This work began by coating the path in a strong dilution of Tile Doctor Remove and Go which as the name suggests is a coatings remover that breaks down dirt, old sealers and other contaminates. As usual it was left to dwell for ten to fifteen minutes to give it time to break down the soils.

Then I introduced a heavily weighted buffing machine fitted with a 100-grit diamond pad to scrub the product into the tile. The industrial diamonds in the pad slightly cut the tiles resulting in a Black and White slurry. This is then rinsed with water then extracted with a wet vacuum cleaner.

Sealing a Victorian Tiled Pathway

Once the tiles had dried from the warm Sun, I was able to start applying the sealer which for these tiles I applied Tile Doctor X-Tra Seal. This is a modern oil-based sealer that is rated for external use and contains UV protection thereby providing excellent protection and making the tiles very easy to maintain.

Victorian Black White Pathway After Restoration Surbiton

This was a long job that due to being outside I had to come back to due to the weather, so it took longer expected but I think the transformation speaks for itself. Lastly for aftercare cleaning I recommended the use of Tile Doctor Neutral Tile Cleaner. Most tile cleaning products you find in supermarkets are simply too strong for the sealer and can degrade them prematurely.

Professional Victorian Tiled Pathway Repaired and Restored in Surrey

Neglected Black & White Victorian Tiled Pathway Restored in Surbiton Read More »

Victorian Tiled Path Restoration Surbiton

Damaged Victorian Tiled Pathway Fully Restored in Surbiton

1 Comment / Ewell Tile Cleaning, Victorian Tile Cleaning / Rupert Mcloud

I was contacted in February last year by a homeowner in Surbiton regarding the Victorian Path at the front of their property which was in a really bad state. I’ve restored a number of these pathways in the past so I was more than happy to pop over and provide a quote for doing the work. I did mention though that February was not a good time to do the work due to the poor weather and that the work would be done in the spring at the earliest.

Victorian Pathway Before Restoration Surbiton

The path was indeed in a bad state as described so after survey the path and making detailed notes it took me some time to put the quote together. There was extensive damage in two areas and a large crack close to the house. Original vintage tiles are generally available though sometimes stock can run low. I took notes of size, colour, and number needed while the customer made me a cup of tea. Happy with the quote we agreed I would return in May for three days to do the work.

Restoring a Damaged Victorian Tiled Path

This type of job takes lot of preparation, the two areas had to be totally cleaned out, broken tiles removed, mud and foliage disposed of. Once that was done, I set about cleaning up the path and removing old tile adhesive with a power chisel where needed.

Next up was cleaning the remaining existing tiles. Using a yard broom, I spread five litres of Tile Doctor Acid Gel over the whole length from door to pavement. This was left to soak in for thirty minutes so it could really get to work breaking down the ingrained dirt. While this was working, I introduced in my weighted buffing machine, attached a coarse 200-grit diamond burnishing pad, and added some iron bars to weigh the machine down. More weight means improved contact and therefore a better result. Working my way from road to the front door the machine was run over each tile slowly removing the grime and ingrained dirt in the process.

Once complete, all residue and dirt was rinsed off the path and removed with a wet vacuum cleaner. After a quick wipe over with warm water the tiles were left to dry in the sun.

Repairing a Victorian Tiled Pathway

The following day I returned to carry out the tiling of the two gaps. Since quoting for the work in February I had plenty of time to source replacements that were an exact match for the originals. Victorian tiles are still very popular and there are several companies in the UK where you can find a good match for your project failing that there’s always eBay.

Armed with a bucket of adhesive and a tile cutter I spent the whole day laying what is essentially a tile pattern jigsaw. The path was then left to dry overnight. I also taped the area off like a crime scene to ensure pedestrians would steer clear.

Sealing a Victorian Tiled Pathway

The weather window held out and the next day I was able to move onto sealing the tiles with Tile Doctor X-Tra Seal. This is an oil-based sealer that is fully breathable sealer and will cope well with the ravages of the UK weather. The new sealer will protect the tiles for ingrained dirt going forward making the path very easy to clean. Also, the new sealer did a great job of blending in the new and replacement tiles.

Victorian Pathway After Restoration Surbiton

Once complete the path looked like it had only just been laid and was completely transformed by the work I had done. Needless to say, the owner of the property was very happy with the outcome and I bet the postman will be surprised the next time he visits.

For aftercare cleaning I recommended the use of Tile Doctor Neutral Tile Cleaner. Most tile cleaning products you find in supermarkets are simply too strong for the sealer and can degrade them prematurely.

Professional Victorian Tiled Pathway Floor Maintenance in Surrey

Damaged Victorian Tiled Pathway Fully Restored in Surbiton Read More »

Small Quarry Tiled Floor Stained with Adhesive and Paint Renovated in Woking

1 Comment / Quarry Tile Cleaning, Woking Tile Cleaning / Rupert Mcloud

This client has lived in the same Woking property for thirty years and had recently decided to lift the linoleum by the back door to the property. Underneath was a small rectangle of Quarry tiles and the decision was made to lift all the lino and see what could be done to restore the original floor.

Quarry Tiled Floor Before Renovation Woking

My job was to fully remove the linoleum and adhesive, paint splashes and to seal the floor in what was a high traffic area. Although small, I was aware there would probably be a lot of adhesives to remove, and the tiles may be damaged underneath.

I’ve been a Tile Doctor for many years and if you look at my website, you will see I’ve tackled all sorts of Tile, Stone, and Grout situations. So confident I could restore the floor to their satisfaction and optimistic that the job would not take too long I provided a quote for the work which they were happy to accept, and a date was scheduled for my return.

Cleaning a Quarry Tiled Hallway Floor

The first task was to protect the surrounding skirting boards and door; then a strong dilution of Tile Doctor Remove and Go was applied and left to dwell for 20 minutes. This product is a strong alkaline coatings remover designed for use on Tile that breaks down adhesives and other coatings such as paint spots and sealers. Using a coarse 100-grit diamond pad fitted to a rotary buffer machine I set about scrubbing the adhesives from the surface of the Quarry tile.

This is an effective method that not only removes the glue but also cleans up the tile taking away what was probably thirty years of ingrained dirt in the process. Once done the glue and soiling was rinsed and extracted. Stubborn areas and corners were treated by hand using a 60-grit diamond block until I was satisfied the whole floor was as clean as it could be.

Sealing a Quarry Tiled Hallway Floor

As we were in the middle of the July heatwave, I was able to dry the tiles quickly, and is it was a small area there was no need to leave the floor to dry off overnight. Wet tiles mustn’t be sealed as the seal will not cure so before moving onto the next step, I took several moisture readings with a damp meter. The floor was soon within acceptable range, so I was able to apply the sealer later that afternoon.

As it was an old house and a high traffic area, I suggested sealing the floor with Tile Doctor Seal and Go Extra. This offers a very strong seal with a nice sheen. It’s not too shiny for an elderly house and will last years, it’s also breathable which is an important consideration when sealing old floors that don’t have a damp proof membrane. I applied two coats, letting them dry in-between.

Quarry Tiled Floor After Renovation Woking

My client was over the moon with the transformation and very pleased to see the back of the linoleum floor which really had seen better days. A light mop using Tile Doctor Neutral Tile Cleaner would ensure the nice sheen would stay put and the rich colour of the quarry tiles would be maintained. Tile Doctor Neutral Tile Cleaner is pH neutral so it is not harsh on the floor and will not damage the newly applied seal, like stronger household cleaners might.

Professional Restoration of a Quarry Tiled Hallway in West Surrey

Small Quarry Tiled Floor Stained with Adhesive and Paint Renovated in Woking Read More »

Soiled Victorian Path Repair Restoration Esher

Neglected Victorian Tiled Pathway Repaired and Restored in Esher

1 Comment / Esher Tile Cleaning, Victorian Tile Cleaning / Rupert Mcloud

This customer in Esher requested help renovating their Victorian tiled pathway which as you can see from the photograph below was looking very neglected and in a poor state of repair. As well as some damage and missing tiles, dirt had been come ingrained and, in some places, there was vegetation growing between the tiles.

Soiled Victorian Tiled Pathway before renovation Esher

When working on external Victorian tiles like this example you really do need to have warm weather and I will often put requests for restoration work like this one on hold until the spring on summer.

Restoring a Heavily Soiled Victorian Tiled Path

To remove all the vegetation and clean up the tiles, I applied a mixture of acid-based Tile Doctor Grout Clean-up and left it to dwell and soak in for a good thirty minutes. This product removes mineral deposits from the tile and will neutralise salt problems such as efflorescence.

The solution was worked into the tiles using a rotary floor buffer fitted with a coarse 100-grit diamond pad. The industrial diamonds in the pad skim the surface of the tile exposing its original colour. All dirt is washed away and removed using a wet vacuum. The tiles were then left to dry.

While drying I carefully removed all the broken tiles with a hammer and chisel. Old Victorian tiles are super tough but often brittle so care must be taken when removing a single tile as very often the one next to it will pop out as a result some tiles should just be left where they are or you end up replacing half the path. I do have to warn customers that due to the age of the installation an “as new” result is an unrealistic expectation. These paths are often over 100 years old and are susceptible to our weather. I often tell customers they can expect some “Characterful” features once the job is done.

Once the path was cleared of debris, I set about cutting and fitting replacement tiles which I had managed to source earlier. Victorian tiles are still very popular and there are several companies in the UK where you can find a good match for your project.

Sealing a Victorian Tiled Pathway

The weather was excellent so it wasn’t long before I was able to move onto sealing the tiles with a couple of coats of Tile Doctor Colour Grow. This is a fully breathable sealer that will cope with the weather and as its name suggests it enhances the colours in the tile, the new sealer will protect the tiles for ingrained dirt going forward making the path very easy to clean. Also, the new sealer did a great job of blending in the new and replacement tiles.

Soiled Victorian Tiled Pathway after renovation Esher

Once complete the path was completely transformed and looked so much healthier. Naturally there were some “Characterful” imperfections but as I mentioned earlier this just echoes the history of the property.

Professional Victorian Tiled Pathway Floor Maintenance in Surrey

Neglected Victorian Tiled Pathway Repaired and Restored in Esher Read More »