Leatherhead Tile Cleaning

Leatherhead

Welcome to my Work History archive where you will find examples of the cleaning and renovation of tiles carried out in Leatherhead.

Terracotta Floor Before After Renovation Leatherhead

Terracotta Floor Restored at 400-Year-Old Cottage in Leatherhead

This client had acquired a 400-year old cottage in Leatherhead as part of his divorce agreement. The front room was tiled with Terracotta which is a soft stone and particularly porous. The tiles had seen a lot of wear and use over the years and were now in need of some love.

Terracotta Tiled Floor Before Restoration Leatherhead

He emailed over some photographs however it’s difficult to tell the best remedy without doing any testing, so I arranged visit the property and take a proper look. It was immediately clear the Terracotta had become badly discoloured in places some of which was from burning logs which had previously fallen from the fireplace onto the tiles. There was also a considerable amount of red paint around the edges that would need removing.

This work would take two days with at least 48 hours in-between days to allow for evaporation as a wet tile cannot be sealed. The client was happy to go ahead with my quote and we arranged a suitable time to complete the work for him.

Cleaning a Terracotta Tiled Living Room Floor

Firstly, as the terracotta is soft and more importantly red it can make a mess of the woodwork when cleaning with water, so I covered the kickboards with sticky plastic coating to ensure they were protected.

Then I removed the edging paint by softening it with an application of a strong dilution of Tile Doctor Remove and Go. Once left for half an hour the paint starts to soften and this makes it easier to remove, although this is a manual process carefully scrapping the remains of the paint away.

Next, I coated the floor with Tile Doctor Oxy-Gel. This strong cleaning product is left for half an hour to work into the pores of the Terracotta. With some water I gently cleaned the floor with a rotary machine fitted with a nylon pad. This is a wet process, so no dust is created.

For the next few hours, I cleaned the whole room. The areas damaged by burning wood were worked on with a diamond encrusted pad to get deep into the tile. When finished, the tiles were clean and more consistent in appearance and colour. I left the floor for the weekend to fully dry.

Sealing a Victorian Tiled Hallway Floor

On the Monday I returned to seal the Terracotta first checking the tiles had dried out using a damp meter. The customer didn’t want either a shiny finish or a matte finish. He did want a strong, protective sealer so we agreed on using Tile Doctor Seal and Go Extra which leaves a sheen finish and will last for years. The floor was now fully protected and should be durable for the foreseeable future.

Terracotta Tiled Floor After Restoration Leatherhead

The client was very happy with the work we had carried out, it had really transformed the room and he was looking forward to getting the furniture back in to position.

 

Professional Restoration of a Terracotta Tiled Living Room in Surrey

Terracotta Floor Restored at 400-Year-Old Cottage in Leatherhead Read More »

Ceramic Tile Grout Before After Cleaning Leatherhead

Ceramic Tile and Grout Cleaning in a Leatherhead Kitchen

At this property in Leatherhead, in the Mole Valley district of Surrey there was ten years of dirt trapped in the grout and no end of cleaning by the owner could improve the situation.

Ceramic Tile Grout Before Cleaning Leatherhead Kitchen

Now desperate to get the floor looking clean again she gave Tile Doctor a call and as their local representative I was asked to go round and survey the floor. Glazed ceramic tiles are very easy to clean and maintain and are a very practical choice for a kitchen floor, however what tends to happen is the dirt gets washed into the grout lines where the rough nature of the grout traps the dirt eventually turning it black.

Ceramic Tile Grout Before Cleaning Leatherhead Kitchen

I could see what needed to be done so I discussed the solution with the client who was relieved that we could help. She agreed to my quote and we booked the work in to be completed.

Cleaning a Ceramic Tiled Kitchen Floor

I returned on the scheduled date and set about preparing the floor with an application of Tile Doctor Pro-Clean combined with Tile Doctor Remove and Go and diluted with water. The cleaning cocktail was left to dwell for approximately fifteen minutes while I unloaded the equipment I would need from the van. Tile Doctor Pro-Clean is a heavy-duty tile and grout cleaner which works best when left soak into the problem area, whilst Tile Doctor Remove and Go is a coatings stripper so I reasoned a combination of the two products would have maximum effect to deep clean the area.

Using a hard wire brush, I rubbed the muck vigorously until the dirt became released into the cleaning solution. Sometimes it is necessary to roll up your sleeves and do some things manually! The resultant slurry was then extracted with a wet vacuum. You can see from the pictures the dirt being released.

Ceramic Tile Grout During Cleaning Leatherhead Kitchen

I had to repeat the process a few times before I was happy with the condition of the grout.
Once the grout was clean, I applied more Tile Doctor Remove and Go to the tiles, scrubbing it in with a deck brush. After ten minutes, using a handheld buffer fitted with a black scrubbing pad I cleaned the tiles. Again, I vacuumed up the slurry then neutralised with plain water. Following a final vacuum, I dried the whole kitchen with an air blower.

Ceramic Tile Grout After Cleaning Leatherhead Kitchen

The client was very happy with the newly cleaned floor, it had really made a big difference to the whole floor and given it a new lease of life.

Ceramic Tile Grout After Cleaning Leatherhead Kitchen

 

Professional Clean of a Ceramic Tiled Kitchen in West Surrey

Ceramic Tile and Grout Cleaning in a Leatherhead Kitchen Read More »

Slate Tiled Shower Before and After Renovation Oxshott

Removing Limescale from Slate Shower Tiles in Oxshott

In the south east of England, we suffer from hard water which as many of you have experienced can calcify on our showers leaving white limescale staining. Without fitting a water softener this limescale causes a problem around the home, particularly when the tiles are dark.

A good example of this problem was this large dark grey slate tiled shower at a house in Oxshott where the limescale had completely ruined the look of the black slate. The problem was most evident on the slate tiles on the floor but had also stained the slate split face slate tiles on the shower wall.

Slate Tiled Bathroom Before Renovation Oxshot
Oxshott is a village in Surrey between Leatherhead and Esher, a survey in 2010 by the Daily Telegraph asserted it was “the village with most footballers” in England and mentioned other celebrities who chose to live in the village probably because Chelsea Football Club have their main training ground in nearby Stoke D’Abernon; It is a beautiful area and is no surprise it is also known as ‘the most expensive village in England’.

The wet room was not that old, but due to the limescale staining was prematurely in need of attention. We often get calls from customers where they have use supermarket products to treat hard water stains, however these products are generally acidic, and this can make the problem worse. I would recommend you always read the back of the bottle before to check it is safe to use on natural stone before applying.

After inspecting the shower, I agreed with the client the best course of action, agreed a price and booked the job in for a later date.

Limescale Stained Slate Wet Room Cleaning

I returned on the agreed date and started work by first removing the existing sealer by applying Tile Doctor Remove and Go which is a multi-purpose stripper that’s formulated for use on natural stone. The product also draws out ingrained stains and removes heavy grease build-up. For best results spray the product onto the tile and then leave for it to soak in and get to work breaking down the coatings etc. After ten minutes the product is scrubbed into the stone which in this case meant by hand. The soiled solution can then be rinsed off the tiles with water. The grout was then cleaned by hand scrubbing in a strong dilution of Tile Doctor Pro-Clean followed by more rinsing.

The final part of preparation was to remove the limescale. This was done with a small handheld diamond block and a wire brush. The block is great for smoothing down all sorts of issues and being small it can get into tight areas. I then dried the whole room with an industrial blower. Slate cannot be sealed effectively when damp as it won’t cure properly. The blower is noisy but best in this situation and is very effective when a fast dry is needed.

Sealing a Slate Tiled Bathroom in Oxshott

After lunch I checked the area was nice and dry by testing the moisture content. I then sealed the whole area, wall and floor with Tile Doctor Colour Grow. Colour Grow, is a colour intensifying sealer that provides durable surface protection as well as allowing the surface to breath and enhance colour. For this project it darkened the tiles nicely and will provide protection from staining, making them much easier for the client to maintain moving forward.

The client was very happy with the lovely result. The bathroom looked clean and fresh again, now it is just a case of trying to keep on top of the limescale.

Slate Tiled Bathroom After Renovation Oxshot
 

Limescale removed from Slate Tiled Shower Wall and Floor in West Surrey

Removing Limescale from Slate Shower Tiles in Oxshott Read More »

Victorian Tiled Hallway Before and After Restoration in Leatherhead

Victorian Tiled Hallway Hidden Under Carpet Restored in Leatherhead

This customer who owned a lovely period residence in Leatherhead had pulled up an old hallway carpet to discover this gem of Victorian Tiled floor. The tiles were covered in carpet adhesive, paint splashes and what looked like a hundred years of dirt. I suspect the previous owners felt it was easier to cover the hallway in carpet rather than have it cleaned properly or perhaps it was just the trend at the time.

Victorian Tiled Hallway Before Restoration in Leatherhead
Given the obvious amount of work that would be needed to restore it we got a call to pop round and provide an estimate. We do a lot of Victorian floor restorations and across the Tile Doctor network I’m confident in saying there is a Tile Doctor working on a Victorian Tiled floor every day of the week.

Victorian Tiled Hallway Before Restoration in Leatherhead
The owner was happy with the quote and we agreed a date to return and restore the floor.

Cleaning a Heavily Soiled Victorian Tiled Floor

Working in a metre square area at a time, I first applied a solution of Tile Doctor Oxy-Gel and left it to dwell for twenty minutes. Oxy-Gel is a relatively new product that being in Gel form is easy to control and stays in place allowing it to dissolve dirt and in this case loosen the adhesive.

After leaving it to dwell for 20 minutes I attacked it with a very coarse 100 grit diamond pad attached to a buffer machine. This removed a minuscule layer from the surface of the tile and with it the muck. I vacuumed up the excess with a wet vacuum then rubbed down the stubborn areas with a 50 grit hand block. This removed a lot of dirt and drastically lightened the whites and blues. Finally I neutralised the floor with two rinses of clean, warm water again using the wet vacuum to remove as much moisture as possible from the floor.

I repeated this process along the length of the hallway and then inspected the floor retreating any areas containing stubborn marks.

Sealing a Victorian Tiled Floor

The hallway wasn’t that big an area so I had agreed to do the whole floor in one day. As a result I needed to force dry the floor so I could seal the tiles in the same day. I have a number of tools to do this including an industrial air mover and a heat gun which were applied for about an hour before it was dry.

To seal the tiles I applied two coats of Tile Doctor Colour Grow which as its name suggests is a colour enhancing sealer that works by impregnating the pores of the tile protecting it from within and enriching the colours in the process. This gave a lovely contrast in colour whilst providing a matt finish; another advantage of Colour Grow is it’s a fully breathable sealer which won’t trap moisture under the tile which is important for these old floors where no damp proof membrane is installed.

Victorian Tiled Hallway After Restoration in Leatherhead
The Victorian tiled hallway floor now looks amazing.

Professional Victorian Tiled Hallway Restoration in West Surrey

Victorian Tiled Hallway Hidden Under Carpet Restored in Leatherhead Read More »

Marble Shower Wall Leatherhead After Cleaning

Acid-Damaged Marble Shower Cubicle Restored in Leatherhead

Marble tiles are a fantastic choice of stone for a shower cubicle because of its distinctive characteristics and quality. It can really add a luxurious feel and when used in a bathroom take it to the next level.

However, it’s extremely important to note that Marble like all natural stone is a porous and acid-sensitive material. It must therefore be cleaned with care using suitable products. This particular Marble tiled shower cubicle at a property in Leatherhead is a good example of this done wrong. The owner had used an acid-based cleaning product to clean the stone, resulting in damage to the sealer and causing unappealing streaks to form.

Marble Shower Wall Leatherhead Before Cleaning
This type of damage can appear irreparable but, with the right combination of cleaning methods and products, it can be fixed. Once the old sealer has been removed, and the tiles have been cleaned, polished and re-sealed, they can look as a good as new. Here’s how I helped this customer restore the Marble shower cubicle.

Cleaning and Polishing a Marble Shower Cubicle

To begin the restoration, I scrubbed the dirty grout lines using Tile Doctor Pro-Clean, which is a highly reliable and multi-purpose alkaline-based product. I then rinsed the tiles with water to remove the traces of cleaning product.

Next, I moved on to the polishing stage of the restoration – what we often refer to as burnishing. This involved the use of small six-inch diamond-encrusted burnishing pads applied with a hand buffer and with different levels of grit – ranging from Coarse to Very Fine. I started with the Coarse grit pad and worked my way sequentially through our four-pad system, polishing the stone with Medium, Fine and eventually the Very Fine pad to really bring up the polish.

Sealing a Marble Shower Cubicle

Once the shine had returned to the Marble and the damage had been removed, I re-sealed the tiles using two coats of Tile Doctor Colour Grow, a penetrating sealer designed to enhance the natural colours and patina of the stone. Once dry, I gave the tiles a final polish with a white buffing pad to put the finishing touches on the restoration.

Marble Shower Wall Leatherhead After Cleaning
The customer was thrilled with the results, saying:
“I’m really happy with the result and we will make sure we don’t use supermarket cleaners again on natural stone. Rupert was a very personable tradesman who took pride in what he was doing. He has identified Tile Doctor Neutral Tile Cleaner as being the product we should have used in the first place and has sent me the website details.”
Another satisfied customer!

Professional Restoration of a Damaged Marble Tiled Shower Cubicle in Surrey

Acid-Damaged Marble Shower Cubicle Restored in Leatherhead Read More »

=================================

West Surrey Tile Doctor

================================= Read More »

Scroll to Top