Travertine Tiled Wall Before After Replacing Sealer Weybridge

Changing the Sealer on a Travertine Bathroom Wall in Weybridge

A client had downsized to flat in Weybridge and before moving in had decided to have a new bathroom fitted which included the installation of Travertine wall tiling.

While she loved the stone, she didn’t like the colour enhancing sealer that the tiler had applied to enhance and protect the tiles. What was once a natural pale colour had turned into a shade of yellow. Unhappy with the colour and getting nowhere with the tiler she decided to call Tile Doctor and have it rectified.

Travertine Bathroom Wall Weybridge Flat Before Sealer Removed

The final appearance of stone whether it is laid on the floor or the wall is a very personal choice and very difficult to make until you see the finished result. I find colour enhancing sealers usually help to bring out the natural features and colours in the stone however I do find lots of clients asking for the natural look.

I’m afraid the photographs on this page didn’t come out that well, there was little natural light in the small bathroom and so they don’t really do the Travertine tiles justice.

Stripping a Colour Enhancing Sealer from Travertine Wall Tiles

To resolve the problem, I first had to remove the old sealer which was done by wetting the walls with water and then applying Tile Doctor Oxy-Gel. Being a gel this tile cleaning product sticks to vertical surfaces allowing for longer dwell times. This was then left to soak in for about half an hour, then using a set of four six-inch diamond burnishing pads, I slowly burnished the walls until the sealer was removed.

The process of burnishing is a messy business and involves the application of four different grades of pad starting with a coarse pad and ending with a polishing pad. The process does generate a fine soil, thankfully being in the bathroom however it was easier to contain. The soiling was removed using more water and a wet vacuum.

I then speed dried the room with a large warm air blower so I could apply the new sealer later in the day.

Sealing a Travertine Tiled Bathroom Wall

After lunch I checked the Travertine wall tiles for moisture using a damp meter and it confirmed they were dry and ready for sealing. To seal I applied a couple of coats of Tile Doctor Ultra-Seal which adds protection but is also invisible leaving the stone with a natural look. This was not a colour enhancing product as per the client’s earlier instruction.

Finally, I cleared up the mess and polished the glass shower screen whilst I was waiting for the sealer to dry. Needless to say, my client was very happy and finally had the desired appearance.

Travertine Bathroom Wall Weybridge Flat After Sealing

For after care I recommend the use of Tile Doctor Aqua-Pro which is a mild but effective cleaner that isn’t too strong for use on sealed stone and can be used daily after a shower. This will keep the sealer in the best condition and the bathroom looking pristine.

 

Professional Restoration of a Travertine Tiled Bathroom in West Surrey

Changing the Sealer on a Travertine Bathroom Wall in Weybridge Read More »