Red and Brown Marble Tiled Kitchen Floor Polishing Weybridge

If you have a Mable tiled floor which is not looking its best, then the transformation I achieved on this floor at a property in Weybridge will definitely be on interest. Having first spoken with the owner on the phone I went over to the house to take a better look at the floor and found that the deep red and brown Marble tiled kitchen floor was really dirty and totally lacking in colour or polish.

The floor hadn’t been professionally cleaned for some time and was now dirty and suffering from the actions of a puppy which likes to charge up and down. The Marble was also full of holes which the client explained had been getting larger. This is not usual for natural stone as it can be very sensitive to acidic cleaning products which if used constantly over time will start to dissolve the stone.

We discussed the remedies available, agreed a cost and arranged a mutually convenient time to carry the work out. I always like to do a site visit to survey the tiles and ideally run a test clean to determine the best methods for resolving the problems. This enabled me to give a more accurate quote and it also gives the customer confidence in my abilities.

Marble Tiled Floor Before Polishing Weybrige

Deep Cleaning Red and Brown Marble Kitchen Tiles

Firstly, I removed the existing sealer with a 400-grit diamond burnishing pad which is applied with water. Although this initially appears to make the floor look worse, this is only temporary, sometimes you have to make it look a little worse before it can get better! Once this was done the floor was rinsed with water to remove the slurry generated and this was then extracted off the floor with a wet vacuum.

Then for the next couple of hours I worked my way from the back door to the front filling all holes with a special expanding resin, then smoothing off as I went to ensure the smoothest of finish could be achieved. Some of the holes were indeed quite large, so there was quite a lot of work to do.

Once the filler had dried I started the polishing process using the 800 and then 1500 grit burnishing pads, once again with more water to lubricate and rinsing the floor in between polishing and removing the slurry as before. This process took much of the day, so I left the floor to dry off and came back the next day to complete the polishing and seal the Marble.

Sealing Red and Brown Marble Kitchen Tiles

The next day I returned and completed the polishing process by applying the fourth burnishing pad which is an extra fine 3000 grit pad, you apply the pad dry with only a little amount of water sprayed onto the floor in process we call a spay burnish and this final pad really brings up the polish in the Marble.

Once the polishing had finished I left the floor for a little while to make sure it was nice and dry and then I applied two coats of Tile Doctor Colour Grow sealer. This is a colour intensifying sealer that provides durable protection by impregnating the pores in the stone with sealer, so dirt cannot become ingrained there. As you can see from the pictures the sealer dramatically enhanced the natural colours in the stone.

Once dry I backed my way out of the house with a final finishing polish using a white buffing pad to remove any excess sealant and bring up the sheen of the tiles even further. I left instructions with the client to keep off for a couple of hours while the sealer cured.

The client was over the moon with the end result, the floor was left shiny, protected and looking in a fabulous condition.

Marble Tiled Floor After Polishing Weybrige

 

Professional Restoration of a Marble Tiled Kitchen Floor in West Surrey

Acid-Damaged Marble Shower Cubicle Restored in Leatherhead

Marble tiles are a fantastic choice of stone for a shower cubicle because of its distinctive characteristics and quality. It can really add a luxurious feel and when used in a bathroom take it to the next level.

However, it’s extremely important to note that Marble like all natural stone is a porous and acid-sensitive material. It must therefore be cleaned with care using suitable products. This particular Marble tiled shower cubicle at a property in Leatherhead is a good example of this done wrong. The owner had used an acid-based cleaning product to clean the stone, resulting in damage to the sealer and causing unappealing streaks to form.

Marble Shower Wall Leatherhead Before Cleaning

This type of damage can appear irreparable but, with the right combination of cleaning methods and products, it can be fixed. Once the old sealer has been removed, and the tiles have been cleaned, polished and re-sealed, they can look as a good as new. Here’s how I helped this customer restore the Marble shower cubicle.

Cleaning and Polishing a Marble Shower Cubicle

To begin the restoration, I scrubbed the dirty grout lines using Tile Doctor Pro-Clean, which is a highly reliable and multi-purpose alkaline-based product. I then rinsed the tiles with water to remove the traces of cleaning product.

Next, I moved on to the polishing stage of the restoration – what we often refer to as burnishing. This involved the use of small six-inch diamond-encrusted burnishing pads applied with a hand buffer and with different levels of grit – ranging from Coarse to Very Fine. I started with the Coarse grit pad and worked my way sequentially through our four-pad system, polishing the stone with Medium, Fine and eventually the Very Fine pad to really bring up the polish.

Sealing a Marble Shower Cubicle

Once the shine had returned to the Marble and the damage had been removed, I re-sealed the tiles using two coats of Tile Doctor Colour Grow, a penetrating sealer designed to enhance the natural colours and patina of the stone. Once dry, I gave the tiles a final polish with a white buffing pad to put the finishing touches on the restoration.

Marble Shower Wall Leatherhead After Cleaning

The customer was thrilled with the results, saying:
“I’m really happy with the result and we will make sure we don’t use supermarket cleaners again on natural stone. Rupert was a very personable tradesman who took pride in what he was doing. He has identified Tile Doctor Neutral Tile Cleaner as being the product we should have used in the first place and has sent me the website details.”
Another satisfied customer!
 
 

Professional Restoration of a Damaged Marble Tiled Shower Cubicle in Surrey

Cleaning & Grout Colouring a Marble Tiled Bathroom in Earls Court

These Marble Tiles were installed in the bathroom at a residence in Earls Court, west London; the Marble certainly gave a luxurious effect but had dulled over time, on top of that the grout had stained in places and both were in need of really good deep clean.

Marble Tile Cleaned

Cleaning Marble Tiles

We set about cleaning the Marble Tiled floor using a mild dilution of Tile Doctor Pro-Clean worked in with Deck Brushes. Once we were happy the floor was rinsed with clean water to remove and chemical residue and we then began polishing the floor using a buffing machine fitted with a green burnishing pad, the green pads are encrusted with very fine diamonds and used with a small amount of water to produce a high shine finish.

Marble Tiles Cleaned and Polished

Applying Grout Colourant

The last step was to colour the grout which is easily done using a bottle of Grout Colourant. This is applied into the grout lines using a tooth brush; as well as changing the colour the product provides an epoxy coating on top of the grout protecting it against future discoloration.

The customer was certainly pleased with difference and said the “the results are amazing” when she returned home from work that evening.

Marble Tiles Cleaned and Polished

 
 

Cleaning and Polishing Marble Bathroom Tiles

Polishing a scratched Marble Floor in Eaton Square, Belgravia, London

We were asked to polish this marble floor in Eaton Square which is in Belgravia one of the most historic residential parts of London, a short distance from Buckingham Palace and Knightsbridge.

Cleaning a Marble Tiled Floor

There were a lot of scratches in the Marble floor and it was also looking dull, so we set about first by giving it a good clean using Tile Doctor Pro-Clean which is an strong alkaline product designed for use on stone floors. It’s important to clean the floor before polishing to ensure there’s no dirt or grit on the floor which might get ground into the floor during polishing making the problem worse.

Marble Floor Polishing in Belgravia Marble Floor Polishing in Belgravia

Polishing Marble Tiles

Once the floor was clean we started the polishing process with a Red Burnishing pad fitted to a rotary machine, the pads are diamond encrusted and can remove deep scratches. We went over the floor carefully covering every tile four times and then followed up with the white, yellow and then green polishing pads, each one polishes the floor to a higher degree. The next step was to apply Tile Doctor Shine crystallising powder with a little water polished in with our polishing machine fitted with a natural fibre pad; this step gives the floor a tough durable finish. The floor was then thoroughly rinsed to remove any residues left on the floor all before giving it a final re-polish to bring out a deep high shine.

Marble Floor Polishing in Belgravia Marble Floor Polishing in Belgravia

 
 

Cleaning and Polishing a Marble Floor in Belgravia