New Black Limestone Floor Issues Resolved in Godalming

A property developer contacted me looking for a solution to two problems with a Black Limestone floor he had installed in the kitchen of a house in Godalming. The first problem was the sealer used didn’t do anything to enhance the look of the Limestone tiles and the new owner was very unhappy with their appearance which was now light in colour as opposed to the black Limestone he was expecting. Secondly the kitchen fitter had dragged a wooden box with a rogue screw hanging from the bottom across the floor in several places leading to scratches.

Scratched Black Limestone Floor Before Godalming

With direct trains to London Waterloo taking 45 minutes Godalming is a very desirable place to live and a property hotspot. Fortunately for the developer I was able to advise that both problems were fixable. Firstly, I had to remover the existing sealer, tackle the scratches and then re-seal and polish. Keen to have the problem resolved I was instructed to go ahead with the work.

Scratched Black Limestone Floor Before Godalming

Removing Sealer and Scratches from Black Limestone tiles

The old sealer was not doing anything to enhance the look of the Black Limestone and simply applying a new sealer on-top of the old would not have improved the appearance, so it had to be stripped off first. To remove the old sealer, I attached a coarse 400-grit Diamond burnishing pad to a floor buffer and ran it over tiles with water for lubrication. The process generates a fine slurry so once the whole floor had been burnished in this way the slurry was rinsed off with more water and then extracted using a wet vacuum.

Next, using a small handheld burnishing block I very carefully removed the scratches that the kitchen fitter had caused. Like the burnishing pads these blocks come in different grades and are encrusted with industrial diamonds.

Once happy I was happy that the scratches were gone, I continued to burnish the floor using a medium 800-grit and then a fine 1500-grit pad. These pads are used to hone the stone and build-up its polished appearance. As with the 400-grit pad water is used to lubricate the process and the floor is rinsed and extracted after each pad.

Sealing Black Limestone Tiles

I left the floor to dry off and returned after the weekend to apply the sealer. This is essential for any stone floor as otherwise dirt will become trapped in its pores making it difficult to clean effectively. Sealers can also enhance the appearance of the stone and in this case, we wanted to really bring out its natural dark colour. With this in mind I chose Tile Doctor Colour Grow which is an impregnating sealer that protects from within and includes a colour enhancing agent that improves colour and, in this case, considerably intensified the black colour of the stone to achieve the effect the customer wanted.

Scratched Black Limestone Floor After Burnishing Godalming

Before leaving I ran over the floor with a white buffing pad to add an extra lustre to the stone, by the time I had finished the floor looked amazing. Unfortunately, I never got to hear how the customer felt about the new appearance of their Black Limestone floor however the property developer was much relieved as he thought the whole floor might need to be replaced.

 

Professional Limestone Floor Renovation in West Surrey

Large Limestone Tiled Floor Stripped and Resealed in Weybridge

Weybridge is an affluent commuter town with good train connections into London Waterloo, as a result, there are some impressive houses here, many of which feature beautiful polished stone floors. This particular residence in Weybridge had a very large Limestone tiled floor installed in their Kitchen/Dinning Room, the floor had been cleaned and sealed about a year prior, so it was still in good condition however the customers ageing dog had a few accidents which had damaged the sealer.

Limestone Tiled Floor Before Cleaning in Weybridge

Urine contains Uric Acid which being an acid can damage the sealer, this is why for daily cleaning we always recommend using pH neutral cleaning product such as Tile Doctor Neutral Tile Cleaner or Stone Soap if the floor is polished. Limestone and Travertine are especially vulnerable to acids due to their high levels of calcium carbonate and often results in pock marks or small holes forming in the stone.

Resealing a Polished Limestone Floor

Once we’d moved the furniture to another room I started with a deep grout clean. I ran a dilution of Tile Doctor Pro-Clean along the grout lines then left it to dwell for five minutes while I got the wet vacuum from the van. When ready I cleaned the grout by hand with a hard nylon brush and then extracted the soiled cleaning solution with the wet vacuum.

With the grout now clean and the soil removed I set up my rotary floor cleaning machine ready to burnish the stone tile and restore the finish with a set of diamond encrusted burnishing pads.

The first pad in the set to be applied is a coarse 400 grit pad that is designed to remove existing sealers and dirt and is run over the tiles with water for lubrication. During the following hours the process was repeated with the medium 800 grit and fine 1500 grit pads which gradually polish the stone and return the shine. The floor is rinsed between each pad to remove the soil which is generated from burnishing.

This process took up much of the day so after rinsing the floor after the 1500 grit pad and extracting the soil with the wet vacuum I left the customer strict instructions not to spill anything on the unsealed floor. The tiles need to be dry before re-applying the sealer and any remaining moisture from the rinsing should evaporate overnight.

Sealing Limestone Tiles

Returning the next day, I tested the floor was dry the applied the first coat of Tile Doctor Ultra-Seal which is a natural look impregnating sealer that soaks into the pores of the stone protecting it from within. Once I’d wiped away any excess I left it to dry for half an hour before applying a second coat.

Breaking for lunch allowed sufficient time for the sealer to dry and I was able to complete the floor with a final polish.

Limestone Tiled Floor After Cleaning in Weybridge

 
 

Stripping and Resealing a Polished Limestone Floor in West Surrey

Red Wine Stains Removed from Limestone Fireplace in Woking

Here at Tile Doctor we have developed numerous products and techniques for dealing with all types of situations related to the cleaning of stone, tile and grout. Whilst the most popular work we do relates to the cleaning and sealing of floors sometimes we get asked to resolve more unusual issues such as this Wine Stained Limestone Fireplace at a house in the London commuter town of Woking.

Unfortunately for the customer their teenage son had knocked a glass of red wine from the dining table onto the carpet and over his parent’s adjacent limestone fireplace which despite early attention left noticeable dark spots in the stone. The customer was keen to have the stains removed and had even resigned himself to the possibility of replacing the whole fixture. Naturally this would’ve cost hundreds of pounds; fortunately, however he discovered Tile Doctor on the internet and realised the staining could be remedied reasonably easily with the correct knowledge and products.

Limestone Fireplace Before Wine Stain Removal Woking

Cleaning a Wine Stained Limestone Fireplace

I mentioned earlier Tile Doctor have developed numerous products and techniques and this includes Tile Doctor Reduxa which is designed to lift the stains out of stone, so I decided to try that first.

My method of application was to spray the stain with Reduxa and leave it to soak into the stone for about twenty seconds. Then I worked the solution into the surface of the stain lightly using a smooth 400 grit diamond block. The next step involves using a heat gun to dry out the area. This process is repeated five or six times until the stain completely disappears. The process works by dissolving the stain into the Reduxa which is then evaporated by the heat.

Limestone Fireplace After Wine Stain Removal Woking

I’m pleased to report that the stain was completely removed by the process and no other treatment was required to resolve the problem further. The customer still has to decide however what to do with the carpet…
 
 

Professional Removal of Wine Stains from Limestone in Surrey

Polishing and Sealing a Dirty Limestone Kitchen Floor in Cobham

This customer, who lives in the small village of Cobham had the unique situation of having been abroad for six months, leaving her adult children in charge of the house. During this time, the fantastic Limestone tiled floor in the kitchen had not received adequate maintenance and its appearance had rapidly degraded. To make the situation worse, it seemed to me that the wrong products had been used on the rare occasions that it had been cleaned.

With the customer now back in the UK and living in the house again, he was keen to have the Limestone tiles restored to their original condition. He contacted me to get the job done.

Limestone Floor Tiles Cobham Before Cleaning Limestone Floor Tiles Cobham Before Cleaning

Cleaning and Polishing Dirty Limestone Kitchen Tiles

My first task was to tackle the dirty grout lines between the Limestone tiles, which were brown and stained. Tile Doctor Pro Clean, which is our reliable alkaline-based tile cleaner, was applied with a grout brush and the stains immediately vanished.

The next stage of the restoration involved polishing the Limestone using our four-pad Tile Doctor diamond-encrusted burnishing pad system. Firstly, I applied a Coarse 400 grit pad to strip away what remained of the old sealer which had been worn down in the high traffic areas of the floor. I then applied the Medium 800 grit and Fine 1500 grit pad to gradually close the pores of the stone which, in turn, restores the polished effect.

Each pad is used in combination with a small amount of water and any excess moisture is removed with a wet vacuum. To end the first day of work, I left the floor to dry and arranged to return in 48 hours to finish the job with sealing.

Sealing Limestone Kitchen Tiles

Upon my return, I ran some quick damp tests to check the floor could be sealed and quickly polished the surface again using a soft white nylon pad to remove the paw prints caused by the customer’s dog in the interim period!

Next, using a small quantity of water, I used the Very Fine 3000 grit burnishing pad to hone the stone to its highest possible quality. Once dry, I applied to the floor two coats of Ultra- Seal, which is a penetrating sealer designed to provide maximum stain protection while providing a natural look finish. One final polish later and the restoration was complete.

Limestone Floor Tiles Cobham After Cleaning Limestone Floor Tiles Cobham After Cleaning

Here’s what the customer said:

“Very professional service, very thorough, and careful with moving furniture. Very informative about the ongoing care and treatment of the flooring. Would most certainly recommend Rupert.”

Professional Tile Cleaning, Polishing and Sealing for a Dirty and Stained Limestone Kitchen Tiled Floor Restoration in Cobham

Large Area of Limestone Tiled Flooring Burnished in Esher

This beautiful Limestone tiled floor was installed in the lounge of a house in the popular London commuter town of Esher. The floor was looking dull after years without a polish and the grout was dirty, there was also a crack running along a number of tiles however without matching replacements it was decided not to address that problem at this time.

Limestone Tiled Floor Before Cleaning and Polishing in Esher

Limestone is a very tough stone so to clean the tile and rebuild the polish it would need to be burnished using different grades of Diamond encrusted pads and then sealed to protect it from ingrained dirt and stains. It’s worth noting that polished stone tile does need to be regularly maintained if you want to keep up its appearance and Tile Doctor does offer this as a service.

Limestone Tiled Floor Before Cleaning and Polishing in Esher

Cleaning Limestone Tile and Grout

Before working on the tiles I decided to treat the grout to a good old fashioned scrub with a strong solution of Tile Doctor Pro-Clean and stiff grout brush. This soon got the grout clean and the soiled cleaning solution was then rinsed away with water and then extracted with a wet vacuum.

Next step was to start the burnishing process using a coarse pad which was attached to a rotary buffer and then, using a litre of water per square metre as lubrication, I cleaned and stripped away any remaining sealer.

Once I’d removed any excess residue with the wet-vacuum, I changed to the a medium grit pad, repeated the cleaning process, and again extracted the soiled residue. Finally, I completed the process once more with the fine grit pad. Once this was completed I buffed the floor with a soft white pad to clean up any dried residue, leaving it ready to be sealed.

Sealing Limestone Tiles

Two days later, once the floor was completely dry, I returned to the property to seal and polish the floor. To begin, I restored the shine to the tiles by applying the last of the four burnishing pads – the very fine grit pad.

To seal the Limestone I applied Tile Doctor Ultra Seal which is an impregnating sealer that soaks into the pores of the Limestone to provide durable protection against ingrained dirt without changing the natural look of the tile.

After an hour, the floor was ready to be buffered once again to bring up the shine and then we were done

Limestone Tiled Floor After Cleaning and Polishing in Esher

I was very pleased with the result and more importantly so did the customer who left the following feedback

“All work very professionally carried out, floors are sparkling.”

Limestone Tiled Floor After Cleaning and Polishing in Esher

 
 

Professional Maintenance of a Honed Limestone Floor in East Sussex